Follow

Installing Fongo Home Phone HT-801

Note: Please ensure your internet modem and router are operational and connected to your internet.

What's in the box:

Top_Image.JPG

Install Instructions:

1. Plug the blue Ethernet Cable into the blue "INTERNET" port of the Fongo Adapter.

Install_1.JPG

2. Plug the other end of the blue Ethernet Cable into any LAN port on your Internet router
(Not into a Wan port).

Install_2.JPG

3. Plug your phone into the green "PHONE" port on your HT-801 adapter.

Install_3.JPG

4. Plug one end of your Power Adapter into an electrical outlet and plug the other end into the "POWER" port of your HT-801. 

Install_4.JPG

The blue lights on the HT-801 Adapter will turn on one-by-one beginning with the power light, then the internet light, then the phone light. 

DO NOT UNPLUG YOUR ADAPTER DURING THIS STAGE!

Install_5.JPG

Once all three blue lights are on, your home phone is ready for use. 

Pick up the phone and you should hear a dial tone. 

If you don't hear a dial tone, contact our support team HERE

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk