Follow

Factory Reset Your Fongo Home Phone Adapter (HT-801)

Instructions for Factory Reset:

1. With the Fongo adapter powered on, unplug the blue Ethernet cable from the Internet port. 

Factory_reset_1.JPG

2. Locate the pin-sized-hole labeled "Reset" on the back of the Fongo adapter.

3. Insert something into the hole such as a paperclip. Press and hold the Reset button (you should hear a click when you initially press in) until all 3 lights blink, then release the Reset button. 

Factory_reset_2.JPG

4. Plug the blue Ethernet Cable back into the Internet port. All 3 lights will briefly turn on, then only the power light will remain on.

5. Wait a few minutes for all 3 lights to turn back on. Once they're all on, your phone is ready for use.  

Install_5.JPG

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk